General:
Display
Power supply
Power consumption
Dimensions / Weight
Remote control
Digital inputs (DIGITAL_IN board):
CH Link
AES-EBU
Coaxial (S/PDIF)
TosLink (S/PDIF)
Optional inputs boards:
NETWORK (future release)
USB_IN (future release)
ANALOG_IN (future release)
Conversion:
Conversion type
DSP processing
Analog output stage
Analog outputs:
L/R Single-ended, balanced and darT
Signal to Noise Ratio (SNR)
Total Harmonic Distortion + Noise
Synchronization (SYNC_IO board):
Clock input
Clock output
480 x 272, 24bits color, AMOLED
Selectable 100V, 115V, 230V AC, 47-63Hz
< 1W (standby), 60W average (operation, stereo)
440mm x 440mm x 120mm (W x D x H) / 20kg
IR remote control, RC5 codes
HD link, PCM (up to 768kHz/32bits) / DSD (cyphered)
XLR, 5Vpp, 110Ohms, up to 24bits/192kHz
RCA, 0.5Vpp, 75Ohms, up to 24bits/192kHz
Optical, up to 24bits/192kHz
Network audio streaming board (clock master, up to 24/192)
USB audio streaming board (asynchronous mode, up to 24/192)
Analog input board with both balanced and single-ended inputs
Linearized R2R, 4x PCM1704 per channel, 705.6/768kHz
CH-HiD up-sampler, DSD to PCM and resolution enhancer
Ultra low noise, high slew rate, zero global feedback, full discrete
2x RCA (75Ohms SE), 2x XLR (Balanced), 2x BNC (50Ohms darT)
Better than 120dB
Less 0.001%
BNC, 0.5Vpp to 5Vpp, 75 Ohms or Hi-Z, 44.1, 48, 88.2, 96,
176.4, 192, 100kHz, 10MHz, 22.5792MHz or 24.576MHz
BNC, 2Vpp, 75 Ohms, input stream sampling frequency
or input clock if externally synchronized
|